Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterSingle Car Door Installation in Denver, CO
Replacing a single car garage door in Denver typically costs between $950 and $2,100, depending on the material, insulation R-value, and whether you are reusing your existing opener. A standard 8-foot by 7-foot single car door installation usually takes one of our crews about three to four hours to complete once the door is on-site. At Servo Garage Doors Denver, we provide a written, flat-rate price for the entire project before we touch a single tool, ensuring you know exactly what you are paying for before work begins.
If you are looking for a professional install, our team specializes in Garage Door Installation in Denver, focusing on the precision required for smaller, single-bay openings. Unlike larger two-car doors, single car doors often face specific clearance challenges in older Denver neighborhoods like Washington Park or Highlands, where driveway space can be tight and the garage frame might be older. We don’t guess or estimate; we measure the opening, the headroom, and the side room, then provide a written scope of work. Call us today at (720) 807-2580 for a free estimate.
When You Need a Single Car Door Replacement
You generally don’t replace a garage door because it looks old; you replace it because the mechanical components have reached the end of their service life or the door has sustained damage that compromises your home’s security. We see these patterns across Denver frequently:
- Structural Panel Damage: A vehicle or heavy object has dented the bottom or middle panels of your single car door, causing the rollers to bind in the track. This puts excessive strain on your opener, often leading to a burned-out motor.
- Rotting Wood or Rust: Denver’s climate, with its rapid temperature swings and winter moisture, takes a toll on door materials. If your wooden door is rotting at the base or your steel door has significant rust through the paint, the integrity of the door is compromised.
- Inconsistent Operation: If your door jerks, stops, or reverses frequently without an obstruction, the issue often stems from a misaligned track or a failing spring system that no longer balances the weight of the door properly.
- Drafty or Non-Insulated Doors: Many detached garages in Denver neighborhoods like Baker or Curtis Park were built without insulation. Upgrading to a modern, insulated single car door can significantly reduce heat loss, which is essential for protecting items stored in the garage during our cold winters.
- Security Concerns: Older, non-locking, or flimsy doors are a primary entry point for intruders. Upgrading to a modern system with updated security features is a practical step for home safety.
Our Single Car Door Installation Process
We operate under The Haven Standard, which means we prioritize documentation and evidence over sales pitches. Here is how we handle a New Door Installation at Servo Garage Doors Denver:
- Measurement and Verification: We arrive at your home and measure the rough opening, headroom (the space above the door), and sideroom (the space on either side). We check for obstructions like gas lines or electrical conduits that might interfere with track placement.
- Written Scope and Price: Per Clause 1 of The Haven Standard, we provide a flat, written price and a clear scope of work before we begin. You will know exactly what the installation includes-no hidden fees for hardware or labor.
- The Photo Record: Before we disassemble your old door, we document the current state of your hardware. If we find that your current opener or tracks are damaged, we photograph the issue so you can see exactly what we see.
- Precision Installation: We install the new door, ensuring the horizontal and vertical tracks are perfectly level. A misaligned track is the leading cause of premature roller wear. We test the balance of the door by disconnecting the opener and ensuring the door stays in place when manually lifted halfway.
- Final Documentation: Once the installation is complete, we provide you with a documented photo record of the finished work, including the tension settings on your new springs and the alignment of the safety sensors.
If you have questions about your specific setup, call (720) 807-2580. We provide free estimates and are happy to discuss your options for brands like LiftMaster or Chamberlain.
Before
AfterSingle Car Door Pricing in Denver
How Much Does Garage Door Installation Cost? (2026 Price Guide) - Denver, CO factors include the weight of the door, the material (steel vs. carriage-house style), and the insulation value. Because we provide upfront pricing, we do not have “starting at” prices that jump once we arrive. Below are the typical ranges for standard installations in the Denver metro area:
- Non-Insulated Steel Door: $950 - $1,300 (Best for detached, unheated garages).
- Insulated Steel Door (R-Value 6-9): $1,200 - $1,600 (Provides basic thermal protection).
- High-Insulation Door (R-Value 12+): $1,500 - $2,100 (Recommended for attached garages to improve home energy efficiency).
These prices include the removal and disposal of your old door, the installation of the new door, and testing of the existing opener. If you need a new opener or additional hardware, that is documented separately in your written estimate. We offer a Free Second Opinion on any written estimate you have received from another company. Just bring us the paperwork, and we will review it against our standards.
FAQs - Single Car Door
How long does it take to install a single car door in Denver?
A standard single car door installation typically takes our team between three and four hours. This includes removing the old door, cleaning the tracks, installing the new panels, setting the spring tension, and verifying safety sensor alignment. Call (720) 807-2580 to schedule a time that works for your calendar.
Do I need to replace my tracks when I replace my door?
It depends on the condition of the existing tracks. If your current tracks are bent, rusted, or do not match the specifications of the new door, we will recommend replacing them to ensure the door operates smoothly and safely. We document the condition of your tracks in our pre-installation assessment, so you always know why a replacement is or is not recommended.
Can you match the style of my neighbor’s door?
Yes, we work with all major brands, including Craftsman, Raynor, and Clopay, and can source various panel designs, window inserts, and colors to match your home’s aesthetic. During our site visit, we can show you samples and help you select a door that fits the architectural style of your home.
Is it dangerous to adjust the springs on my single car door?
Yes, garage door springs are under extreme tension and can cause serious injury if handled improperly. For your safety, we strongly recommend leaving all spring adjustments, winding, and replacements to a trained professional. Our technicians are experienced in handling high-tension systems and will document the final spring balance as part of your service record.
When you are ready to move forward with your home project, our team is here to help. We don’t use high-pressure sales tactics; we provide facts, photos, and a written price. Call us at (720) 807-2580 for a free estimate or to discuss your options.
Written by Marcus Deller, Owner at Servo Garage Doors Denver, serving Denver since 2015.